Olympus PT-15 User Manual

Instruction ManualWaterproof CasePT-015For the digital cameraCAMEDIA C-5050ZOOM Thank you for buying the Waterproof Case PT-015. Please read this inst

Case bodyLCD hoodLCD hood strap(on the body)(Check that the O-ring is normal.)Hand strapGrease for silicon O-ring5 Silica gelpacksPick for O-ring remo

E-10Palm gripBuckle stopperBuckle lock leverBuckle hookO-ringDiffuser and diffuser coverHand strap ringHand strapTripod seatLens ringLens window❈Shutt

E-11Installation explanationHand strapHand strap ringFinished installationGood example Bad exampleInstall the strap.Install the strap on the Case body

E-12This Case is equipped with amode dial knob which permitsoperation of the mode dial ofthe loaded digital camera fromthe outside. After loading thed

E-13Setting the Zoom LeverWhen loading the digital camera in the Case, fit the projecting part of thezoom lever of the digital camera into the recesse

E-142. Advance Check of the CaseAdvance test before useThis Case has been the subject of thorough quality control for the partsduring the manufacturin

E-153. Install the digital camera.Check the digital camera.Check the digital camera before loading it in the Case.Battery ConfirmationAs the LCD monit

E-16①②③OFFOpen the caseRaise the buckle stopper (towards the shutter lever).With the buckle stopper raised, open the buckle opening lever. (When th

E-17NotchLoad the digital camera.Quietly load the digital camera into the Case, taking care that the projectingpart of the zoom lever of the digital c

E-18Pay attention to the orientation.Insertion of silica gelBefore sealing the Case, insert the accessory silica gel bag for preventionof fogging betw

E-1Introduction●Unauthorized copying of this manual in part or in full, except for privateuse, is prohibited. Unauthorized reproduction is strictly pr

E-19Check the loading status.Always perform the following final checks before sealing the Case.• Has the digital camera been loaded so that the zoom l

E-20Installation RemovalInstallation and Removal of the LCD HoodInstallationStrongly push the mounting projections of the LCD hood as shown in thefigu

E-21Final TestThe final test after loading the camera is explained below. This is the only way toeliminate worry about possible entry of water! Always

E-22Set to wide angleSet to teleFlash working range Approx. 0.8 m to 5.6 mApprox. 0.2 m to 3.8 m4. Taking Pictures Under WaterHow to Use the Hand Stra

E-235. Handling After ShootingWipe off any waterdrop.After completing the shooting andreturning to land, wipe off anywaterdrop sticking to the Case.Us

E-24Open the protector carefully, pull up the mode dial from the upper surface of theprotector to disengage it from the mode lever of the camera, and

E-25Wash the Case with pure water.After use, seal the Case again after taking out the camera and wash itsufficiently in pure water as soon as possible

E-266. Maintaining the Waterproof FunctionRemove the O-ring.Open the Case and remove the O-ring from the Case.Removal of the O-ringInsert the O-ring r

E-27Install the O-ring.Confirm that no foreign matter is attached, apply a thin coat of the accessorygrease to the O-ring, and fit the O-ring into the

E-28Replace consumable products.• The O-ring is a consumable product. Independent of the number of timesthe Case is used, it is recommended that the O

E-21. Keep this product out of the reach of babies, infants, and children. Thereis the possibility of occurrence of the following types of accidents.•

E-297. AppendixQ & A on the use of the PT-015Q 1 : Which digital cameras can be used?A 1 : The PT-015 is only for the models C-5050ZOOM.Q 2 : What

E-30(3)In case of the following handling with a camera loaded into the Case,trouble or breakage may be caused for the Case and/or the loadedcamera. Al

E-31the O-ring. Wipe the inside of the Case with a soft cloth not causingany fibers. Remove the O-ring, wipe off any salt, sand, dust, etc., andalso c

E-32(6)Catching of the strap, the bag of silica gel, etc. at the time of sealingthe Case(7)Throwing the Case from a boat into the water, jumping with

E-33• Do not use anticorrosion agents on the metal parts. The metal partsare made of aluminum, brass or stainless steel. Cleaning with purewater is su

E-34After-sale Service●You will receive the guarantee card from your dealer. Please make surethat the dealer's name, the date of purchase, etc. h

E-35Specifications❈ We reserve the right to change the external appearance and thespecifications without notice.Available modelsOlympus digital camera

MEMOPT-015_英 2003.5.1 4:37 PM ページ 37 (1,1)

MEMOPT-015_英 2003.5.1 4:37 PM ページ 38 (1,1)

PT-015M-0211-01http://www.olympus.com/¤ 2003 OLYMPUS OPTICAL CO., LTD.PT-015-2MJ-0503-01San-Ei Building, 22-2, Nishi Shinjuku 1-chome, Shinjuku-ku, To

E-3Batteries● This protector uses the LCD monitor of the installed digital camerafor shooting. Accordingly, the battery is exhausted faster than incas

E-4For Prevention of Water Leakage AccidentsWhen water leakage occurs while this product is being used, repair of the camerahoused in this product may

E-5Handling the Product● Use or storage of the product at the following locations may causedefective operation, defects, trouble, damage, fire, intern

E-6● Do not perform operations other than specified in this instructionmanual, do not remove or modify parts other than specified, and donot use parts

E-22E-23E-26E-29E-7IntroductionPlease read the following items before useFor safe useBatteriesFor Prevention of Water Leakage AccidentsHandling the Pr

E-8Perform the final checks. Visual Inspection Try to move the mode dialFinal Test4. Taking Pictures Under WaterHow to Use the Hand Strap E-22E-22