Olympus PT 033 User Manual

For the digital cameraStylus 720 SW, µ 720 SW Thank you for buying the Underwater Case PT-033. Please read this instruction manual carefully and use

E-91. PreparationsCheck the contents of the package.Check that all accessories are in the box.Contact your dealer if accessories should be missing or

E-10Names of the partsNote :The Case operation parts marked by❈corresponds to the operation partsof the digital camera. When the operation parts of th

E-11Install the strap on the Case body.:Please install the strap correctly as shown above. OLYMPUSIMAGING CORP. shall bear no responsibility for damag

E-12How to Press the ShutterWhen pressing the shutterlever, press it gently, so thatthere will be no movement ofthe camera.Note: • For detailed operat

E-132. Advance Check of the CaseAdvance test before useThis Case has been the subject of thorough quality control for theparts during the manufacturin

E-143. Install the digital camera.Check the digital camera.Check the digital camera before loading it in the Case.Battery ConfirmationThe flash is use

E-15Prepare the camera.Applicable Digital CamerasThis product (PT-033) is designed exclusively for use with the Stylus720 SW and µ 720 SW digital came

E-16Confirm that the digital camera is OFF and insert the digital cameragently into the Case.:•If the digital camera is not inserted properly, it may

E-17Insertion of silica gelBefore sealing the Case, insert the accessory silica gel bag forprevention of fogging between the bottom of the camera and

E-18Seal the Case.Make sure the camera is loaded properly.:•Seal the Case by turning both buckle lock levers downin arrow direction. When one of the b

E-1Introduction● Unauthorized copying of this manual in part or in full, except forprivate use, is prohibited. Unauthorized reproduction is strictly p

E-19After sealing the Case, make sure the camera is functioning properly.1. Press the POWER button on the Case and confirm that the cameraturns ON/OFF

E-20When using the Case, current shooting scene and shooting modeinformation should be confirmed by checking the shootingscene/shooting mode indicator

E-21Installation and Removal of the LCD HoodInstallationStrongly push the mounting projections of the LCD hood as shownin the figure into the guides a

E-22Perform the final checks.Visual InspectionAfter sealing the Case, check the sealing part of front and rear lidvisually to confirm that the O-ring

E-23Now everything is all right!Have a nice dive!Final TestThe final test after loading the camera is explained below. This is the only way toeliminat

E-244. Taking Pictures Under WaterHow to Use the Hand StrapPass your hand through the accessory hand strap and adjust thelength with the stop button.T

E-255. Underwater Shooting According to the Scene TypeUnderwater shooting modesSuitable for shooting a scene that extendsacross a wide range such as a

E-26How to select the shooting scenePress the / /SCN button on theCase to set the camera mode to the SCN(Scene) mode. When the selection displa

E-276. Handling After ShootingWipe off any waterdrop.After completing the shootingand returning to land, wipe offany waterdrop sticking to theCase. Us

E-28Take out the digital camera.Open the Case carefully and take the digital camera out.:•Always place the opened Case with the O-ring sidefacing up.

E-21. Keep this product out of the reach of babies, infants, and children.There is the possibility of occurrence of the following types ofaccidents.

E-29Wash the Case with pure water.After use, seal the Case again after taking out the camera and wash itsufficiently in pure water as soon as possible

E-307. Maintaining the Waterproof FunctionRemove the O-ring.Open the Case and remove the O-ring from the Case.Removal of the O-ring Insert the O-ring

E-31:•Maintenance of the waterproof functions is required evenbefore using this product underwater for the first time.•When a mechanical pencil or a s

E-321Install the O-ring.Confirm that no foreign matter is attached, apply a thin coat of theaccessory grease to the O-ring, and fit the O-ring into th

E-33Replace consumable products. The O-ring is a consumable product. Independent of the number oftimes the Case is used, it is recommended that the O

E-348. AppendixQ & A on the use of the PT-033Q1 :What digital camera models can be used with this product?A1 :This product (PT-033) is designed ex

E-35(c)Places with volatile substances(d)Places with vibrations(3)In case of the following handling with a camera loaded into theCase, trouble or brea

E-36Case under direct sunlight. Exposure to high temperatures or directsunlight may cause deformation, discoloration or breakage of the Caseand deteri

E-37(6)Catching of the strap, the bag of silica gel, etc. at the time of sealingthe Case(7)Throwing the Case from a boat into the water, jumping with

E-38water is sufficient.•Do not use commercial defogging agents. Always use the originalOlympus defogging silica gel.•Do not use adhesive for repairs

E-3Batteries● Use only an Olympus lithium-ion rechargeable battery (LI-42B) withthe camera.● Take care that the battery electrodes do not become wet.

E-39Specifications❈ We reserve the right to change the external appearance and thespecifications without notice.Available modelsOlympus digital camera

E-40MEMOPT033_E.qxd 06.2.23 8:36 PM ページE-40

E-41MEMOPT033_E.qxd 06.2.23 8:36 PM ページE-41

E-42MEMOPT033_E.qxd 06.2.23 8:36 PM ページE-42

PT033_E.qxd 06.2.23 8:36 PM ページE-43

E-4When water leakage occurs while this product is being used, repair of thecamera housed in this product may become impossible. Please observethe fol

E-5Handling the Product● Use or storage of the product at the following locations may causedefective operation, defects, trouble, damage, fire, intern

E-6● Do not perform operations other than specified in this instructionmanual, do not remove or modify parts other than specified, and donot use parts

E-7Introduction ......E-1Please read the following items before use ...

E-8Installation and Removal of the LCD Hood .........E-21Installation ...............