Olympus FE-330 User Manual download pdf (Page 36)

Using OLYMPUS Master

Note

• Use a computer with a pre-installed operating system. Operations are not guaranteed on

home-built computers or computers with an updated operating system.

• Operations are not guaranteed when using an added USB or IEEE 1394 (FireWire) port.

• To install the software, you must log on as a user with administrators’ privileges.

• If you are using Macintosh, be sure to remove the media (drag & drop onto the trash icon)

before performing the following operations. Failure to do so could result in unstable computer

operation and the need to reboot.

• Disconnect the cable connecting the camera to the computer

• Turn off the camera

• Open the camera’s battery/card compartment cover

1 Make sure the camera is turned off.

• The monitor is off.

• The lens is retracted.

2 Connect the multi-connector on the camera to

the USB port on the computer using the provided

USB cable.

• Refer to your computer’s instruction manual to locate the

position of the USB port.

• The camera turns on automatically.

• The monitor turns on and the selection screen for the USB

connection is displayed.

3 Select [PC], and press .

Connecting the camera to a computer

For how to install the OLYMPUS Master software, refer to the installation guide

included in the CD-ROM.

Monitor

Multi-connector

Connector cover

EASY PRINT

USB

SET

EXIT

CUSTOM PRINT

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 62 63

No comments

Olympus FE-330 User Manual Page 36