151MOVIE PICTURE DISPLAY MENU* Press the Menu button to set the following items when the Mode dial isset to and a movie picture is displayed on the LC
160CARD SETUPALL-FRAME ERASESet the Mode dial to .Display a picture with onthe LCD monitor using theJog dial.Press the Menu button todisplay the Men
Press the OK button with YESselected to erase all thepictures in the card.• To cancel, select NO using theright arrow on the jog dial.When complete, N
CARD FORMATYou can format the card.Set the Mode dial to .Display a picture with onthe LCD monitor using theJog dial..Press the Menu button todispla
163Note:• Formatting the card erases the existing data, including pictures whichhave been write-protected from the camera. Be careful not to eraseimpo
164
OLYMPUS DIGITAL CAMERA4STORING DATA FORPRINTING PICTURES● Recorded images can be printed out with a printer.● Selected images can be reserved in a Sma
166ABOUT PRINT SETTINGSYou can make prints of images stored in a SmartMedia, using one of thefollowing methods:1. Images in the SmartMedia can be sele
167Note:• Images taken with this camera can also be printed using a printer or at aphoto lab that supports the Design rule for Camera File system/DCF.
You can store data for making prints with a printer or at a lab thatsupports this system.ALL-FRAME PRINT RESERVEYou can store data for printing all th
Press the left/right arrows onthe Jog dial to enter thenumber.• Press the left arrow to decreasethe number, and the right arrowto increase it.• The nu
152You can play movies you have recorded. will appear on the LCDmonitor for movies.Set the Mode dial to .• The LCD monitor turns onautomatically.Dis
SINGLE-FRAME PRINT RESERVEYou can store data for making prints with a printer or at a lab thatsupports this system.Set the Mode dial to anddisplay a
Press the arrows on the Jogdial to select the image youwould like to print.• Left arrow: Displays the imagein the previous frame.Right arrow: Displays
172PRINT-RESERVE (Cont.)Press the left/right arrows onthe Jog dial to enter thenumber of prints.• Press the left arrow todecrease the number, and ther
173Note:• Images taken with this camera can be printed using a printer or at a labthat supports the Design rule for Camera File system/DCF.• If you ar
TRIMMING PRINT RESERVEYou can print an enlarged part of a recorded picture.Select PRINT ORDER— ,then press the OK button. ThePrint reserve selection s
175When the position is set,press the OK button.Move the cursor to set thebottom right corner of theimage that you would like toprint.• Use the same p
176PRINT-RESERVE (Cont.)Note:• The size of the printed image will vary depending on the print reservesettings. An image trimmed to a small size will h
177RESETTING PRINT RESERVEThis resets all the print reserve settings for images saved in a card.Set the Mode dial to anddisplay a still picture.Press
5USING APERSONALCOMPUTEROLYMPUS DIGITAL CAMERA
153Press the OK button duringthe movie to pause it. Press itagain to restart.• The following operations canbe performed during pause.Press the top arr
180COMPUTER SYSTEM REQUIREMENTSWhen using the provided utility software:Personal computers used with this camera must conform to the followingminimum
181INSTALLING PROVIDEDSOFTWARETo take full advantage of a wide range of functions, including download,display, storage and panorama, your Olympus digi
182CONNECTING TO A PERSONALCOMPUTERUse the appropriate connector according to your computer’sspecifications.● For USB-equipped computers (IBM PC/AT co
183USING A PERSONALCOMPUTERMake sure that the power of the personal computer and thecamera are OFF.Connect the provided USB cable or optional RS-232C
184TRANSFERRING DATA FROMSmartMediaPC CARD ADAPTERThe picture data in the SmartMedia canbe directly transferred to a personalcomputer equipped with a
185USING CAMEDIA MasterVIEWING IMAGES STORED IN THE CARDON YOUR COMPUTERYou can view images stored in a SmartMedia card via CAMEDIA Master.Start CAMED
186USING CAMEDIA Master (Cont.)Place the cursor on thedesired image and double-click on it.• This will open the selectedimage.4TRANSFERRING DATA USING
187PROCESSING IMAGES USINGCAMEDIA MasterYou can process images (changing tones, composing, and so on) usingthe provided CAMEDIA Master or other applic
188Select [Image] – [Instant Fix]on the menu bar.• This will brighten the selectedimage.2CORRECTING BLURRY IMAGESBacklight sometimes makes the whole i
189Place the cursor on the imageyou want to correct anddouble-click on it.• This will display the selectedimage.Select [Image] – [Filter] –[Sharpen] o
154PICTURE INFORMATIONYou can display picture information (settings, date/time, file number, etc.)on the LCD monitor.Set the Mode dial to .Press the
190• This will sharpen the selectedimage.COMPOSING IMAGES WITH TEMPLATESYou can easily compose images with templates in CAMEDIA Master.Place the curso
191Select [Image] – [TemplateSuperimpose] on the menubar.• This will display the composewindow.Select a template and click on[Apply].• This will displ
OLYMPUS DIGITAL CAMERA6CAMERASETTINGS● The settings can be adjusted in the Menu. EachMenu (still picture record menu, still picture displaymenu, movie
194ALL RESETClears adjustments and returns to the default settings.Set the Mode dial to P, A/S/Mor .Press the Menu button todisplay the Menu.Press the
195Note:• The setting will remain until it is readjusted.With ON selected, the settings of the following items will becanceled and reset to the defaul
When the power is turned off, the camera can revert to the settings thatyou desire. Even if the settings are changed while taking pictures, thecamera
197Press the top/bottom arrowson the Jog dial to select themode you would like to set.The modes that can beselected are shown in thetable on the follo
Flash Auto/Red-Eye Reducing/Fill-In/OffSpot/Macro Off/Spot/Macro/Spot + macroZoom position 32mm/50mm/70mm/96mmAperture value F2.8 ~ F11Shutter speed 1
199Set the Mode dial to P, A/S/Mor .Press the Menu button todisplay the Menu.Press the top/bottom arrowson the Jog dial to selectMODE SETUP, then pre
155HQSIZE: 320 2400" / 100"12.23.,00 21:56Sound recordProtectMovie pictureBattery checkRecording modeImage sizeWhite balanceDate/TimeSecon
200TIFF SETTINGSThis sets the resolution for the TIFF mode.Set the Mode dial to P orA/S/M.Press the Menu button todisplay the Menu.Press the top/botto
201Use the top/bottom arrows onthe Jog dial to select theresolution.• 2048 x 1536, 1600 x 1200,1280 x 960, 1024 x 768 or 640x 480 are available.• The
202SQ1, SQ2 SETTINGSYou can select the resolution and compression rate for SQ1 and SQ2.NORMAL quality allows more pictures to be stored in a card, whi
Press the right arrow on theJog dial, then press the top/bottom arrows to select HIGHor NORMAL.Press the OK button to returnto the MODE SETUP screen.•
204BEEP SOUNDYou can select the volume of the operating beep sound.Set the Mode dial to P, A/S/M,or .Press the Menu button todisplay the Menu.Press t
205FULL-TIME AFFull-time AF keeps the image on the LCD monitor in focus at all timeswithout having to press the Shutter release button.Set the Mode di
206FULL-TIME AF (Cont.)Press the left arrow on theJog dial to confirm the setting.Press the OK button to savethe setting. Press again tocancel the Men
207REC VIEWRec view lets you select whether to display the image after recording.Rec check lets you check the image and decide whether or not to save
Press the left arrow on theJog dial to confirm the setting.Press the OK button to savethe setting. Press again tocancel the Menu.When CHECK is selecte
209Use the Jog dial to select animage.Press the OK button to savethe image. The next image inmemory will appear.• If sound is recorded with a stillima
156FUNCTIONSThese functions enable you to create an index of recorded images and toedit images.CREATING AN INDEXRecorded movies can be displayed as an
If Bracketing was used to take a picture, the index will appear asshown below.If the memory only contains animage shot with Bracketing, all of itsfram
21110001001 1002 10031003OKImage shot with Bracketing (5 frames)OKBrightest+ Com-pensation– Com-pensationNormalDarkest1239 12401241OKImage shot with B
212FILE NUMBERYou can select the file numbering system for images transferred to apersonal computer. Files can be numbered from 0001 to 9999 andfolde
213Set the Mode dial to P orA/S/M.Press the Menu button todisplay the Menu.Press the top/bottom arrowson the Jog dial to selectMODE SETUP, then press
214Press the top/bottom arrowson the Jog dial to select FILENAME.Press the right arrow on theJog dial, then press thetop/bottom arrows to selectRESET
215LCD BRIGHTNESSYou can adjust the brightness of the LCD monitor.Set the Mode dial to P, A/S/M,or .Press the Menu button todisplay the Menu.Press th
216Press the top/bottom arrowson the Jog dial to select .Press the right arrow on theJog dial to select SETUP, thenpress the OK button.• appears onth
217METERS/FEET SELECTIONYou can select meters or feet to be used by the Manual focus settingscreen. (In the Macro mode, the unit will shift between ce
218INDEX-DISPLAY ADJUSTMENTYou can select the number of frames shown in the Index-Display mode.Set the Mode dial to .Press the Menu button todisplay
7MISCELLANEOUSOLYMPUS DIGITAL CAMERA
157• The total movie time and timeof the current frame willappear in the left corner on theLCD monitor. • To go to the next frame, pressthe right arro
220QUESTIONS AND ANSWERSQHow long will the batteries last?ABattery life is affected by many variables such as the amount of LCDmonitor use, the freque
221QCan I use a filter, hood or conversion lens?AYou cannot use a filter or a hood. A conversion lens adapter (optional)is required to attach a conver
222TROUBLESHOOTINGOPERATING PROBLEMSThe camera does not work.1 The power is OFF.[ Set the Mode dial to turn on the power. (P. 36)2 The batteries are l
223The flash does not fire.1 The flash mode was set to the Off mode.[ Check the flash mode before shooting. (In the Sequence modeand the Panorama mode
224TROUBLESHOOTING (Cont.)Image protect, Single-erase, All-frame erase or Card format cannotbe performed.1 A write-protect adhesive seal is affixed to
2254 The subject was too small and was backlit.[ Set the flash to Fill-In mode. (P. 64) Or, use the Spot meteringmode. (P. 68)5 The Sequence mode was
226SYSTEM CHARTA variety of capabilities are available when connected to optionalequipment.Printer (P-330N/P-330)TVPersonal computerMO driveSmartMedia
227ERROR CODESError codes appear when there is a problem with the camera.Error codes displayed on the control panel will flash.(No display)LCD monitor
228ERROR CODES (Cont.)Control panelLCD monitor(Formatconfirmationscreen)NOPICTURECARDFULLError contentThe card is notformatted.There are nopicutures i
229OPTIONAL ITEMS• Photo Printers For Olympus Digital Cameras• AC Adapter• Camera Case• Standard SmartMedia Card (8/16/32/64MB)• FL-40 extension flas
158FUNCTIONS (Cont.)EDITING A MOVIEThis function is used to delete unnecessary portions of recorded moviesor to split one movie into two.Set the Mode
230COMPATIBILITY OF THEPICTURE DATA• Images taken by this camera may not be properly displayed or printedwith other Olympus digital cameras.• Images t
231SPECIFICATIONSProduct type : Digital camera (for shooting and displaying)Recording SystemStill : Digital recording, JPEG (in accordance withDesign
232SPECIFICATIONS (Cont.)Movie : 1/30 ~ 1/10000 sec.Working range : 31" ~ ∞ (Standard mode)8" ~ 31" (Macro mode)Viewfinder : Optical re
23310 ~ 90% (storage)Power supply : For batteries, use 2 CR-V3 lithium batterypacks, or 4 AA NiMH batteries, NiCdbatteries, alkaline batteries or lith
234
235
Serial number/Numéro de série/Número de serieDigital cameraCD-ROMVT1428OLYMPUS OPTICAL CO., LTD.San-Ei Building, 22-2, Nishi Shinjuku 1-chome, Shinjuk
159Press the right/left arrows onthe Jog dial to select the firstframe, then press the OKbutton.• If the top arrow on the Jog dialis pressed, the firs
Comments to this Manuals