Olympus E-5 User Manual download pdf (Page 81)

Flash shooting

4 Use the super control panel to set the flash mode and other settings for each

group.

5 Select a flash mode.

• Red-eye reduction flash is not possible in RC mode.

6 Press the #UP button to raise the built-in flash.

7 After shooting preparations are completed, take some test shots to check the

flash operation and images.

8 Begin shooting while checking the charging completed indications of the camera

and flash.

x Notes

• Although there is no limit to the number of wireless flashes you can use, it is recommended

that each group have no more than three flashes to prevent flash malfunction due to mutual

interference.

• In RC mode, the built-in flash is used to control the wireless flash. The built-in flash cannot be

used for flash shooting in this mode.

• For 2nd curtain synchronization, set the shutter speed and anti-shock settings to within 4

seconds. Wireless flash shooting may not operate properly when using a slower shutter

speed or anti-shock setting.

LOM

TTL

1 / 8

–

+1.0

OFF

A MODE

Flash control

mode

Group

• Select the flash

control mode and

adjust the flash

intensity individually

for groups A, B, and

C. For MANUAL,

select the flash

intensity.

Flash intensity value

Communication light level

• Set the communication light level

to [HI], [MID], or [LO].

Channel

• Set the communication channel to

the same channel used on the

flash.

Normal flash/Super FP flash

• Switch between normal flash

and Super FP flash.

Flash

intensity

1 2 ... 76 77 78 79 80 81 82 83 84 85 86 ... 170 171

Comments to this Manuals

No comments

Olympus E-5 User Manual Page 81

Comments to this Manuals

Related products and manuals for Cameras Olympus E-5