Olympus E-600 User Manual download pdf (Page 46)

Exposure

Allows you to set the aperture and shutter speed manually. You can check how much it

differs from the appropriate exposure by using the exposure level indicator. This mode gives

you more creative control, allowing you to make whatever settings you like, regardless of the

correct exposure.

Set the mode dial to M and turn the control dial to set the

value.

• The range of aperture values available varies with the lens type.

• The shutter speed can be set to 1/4000 - 60 sec. or [BULB].

• In M mode the exposure level indicator will be displayed. It shows the difference (ranging

from -3 EV to +3 EV) between the exposure value calculated by the currently selected

aperture and shutter speed and the exposure value considered optimum by the camera. If

the difference exceeds ±3 EV, the entire indicator blinks.

Noise in images

While shooting at slow shutter speeds, noise may appear on-screen. These phenomena are

caused when current is generated in those sections of the image pickup device that are not

normally exposed to light, resulting in a rise in temperature in the image pickup device or

image pickup device drive circuit. This can also occur when shooting with a high ISO setting

in a high-temperature environment. To reduce this noise, the camera activates the noise

reduction function.

g“NOISE REDUCT.” (P. 101)

Manual shooting

Aperture value: Turn the control

dial while holding down the F

button to set the value.

Shutter speed: Turn the control dial

to set the value.

F button

Underexposure

Optimum exposure

Overexposure

250 F5.6

-0.3

2009. 09.01

200

arge

Normal

OFF

Exposure level indicator

s0030_e_00_0_unified.book 46 ページ２００９年７月３日　金曜日　午後４時１１分

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 154 155

No comments

Olympus E-600 User Manual Page 46