Olympus E-P2 User Manual download pdf (Page 92)

Setup functions

In P, A, S, M or n mode, current camera settings (including any changes you have made)

are retained when the power is turned off. To reset the camera to the factory default settings,

set [RESET].

Registering [RESET1]/[RESET2]

If settings after a reset are pre-registered to [RESET1]/[RESET2], the camera can be reset to

the factory default settings, by executing [RESET1]/[RESET2]. In the n mode, settings

corresponding to the n mode are reset.

For details on the registered functions, refer to “Functions that can be registered with My

Mode and Custom Reset Setting” (gP. 138).

1 Select either [RESET1]/[RESET2] to register and press i.

• If settings have already been registered, [SET] is displayed next to [RESET1]/[RESET2].

Selecting [SET] again overwrites the registered setting.

• To cancel the registration, select [RESET].

2 Select [SET] and press the i button.

Using reset settings

This resets the camera to the factory default settings. You can also reset the camera to the

[RESET1] or [RESET2] setting.

[RESET] Resets to the factory default settings. For the default settings, see

“Menu directory” (gP. 139).

[RESET1]/[RESET2] Resets to the registered settings.

1 Select [RESET], [RESET1], or [RESET2] and press

the i button.

2 Use fg to select [YES], then press the i

button.

Resetting the camera settings

Menu MENU[W][CUSTOM RESET]

RESET1

YES

BACK

SET

s0026_e_00_0_unified.book Page 92 Tuesday, September 29, 2009 10:30 AM

1 2 ... 87 88 89 90 91 92 93 94 95 96 97 ... 163 164

No comments

Olympus E-P2 User Manual Page 92