Olympus FE-250 User Manual download pdf (Page 27)

Menu operations

The pixel mapping feature allows the camera to check and adjust the CCD and

image processing functions. It is not necessary to operate this function

frequently. Approximately once a year is recommended. Wait at least one minute

after taking or viewing pictures to allow the pixel mapping function to perform

properly. If you turn the camera off during pixel mapping, start again.

Select [PIXEL MAPPING]. When [START] is displayed, press .

This function is used to turn on the camera when K or q is pressed.

• Press ON to adjust the volume.

• You can adjust the volume to one of five levels or mute

the volume.

PIXEL MAPPING ..............................Adjusting the image processing function

K/q...................................... Turning on the camera with the K or q button

YES/ NO

s ......................................................................Adjusting the monitor brightness

BRIGHT/ NORMAL

BEEP.................................................... Adjusting the volume of operation sound

when the buttons are pressed

OFF (No sound)/ LOW /HIGH

8............................................... Adjusting the volume of camera warning sound

OFF (No sound)/ LOW / HIGH

SHUTTER SOUND ........................Adjusting the volume of the shutter button

OFF (No sound)/ LOW / HIGH

VOLUME.................................................. Adjusting the volume during playback

SETUP

BEEP

SHUTTER SOUND

VOLUME

SET

BACK

d4339_e_0000_7.book Page 27 Friday, December 15, 2006 6:05 PM

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 75 76

No comments

Olympus FE-250 User Manual Page 27