Olympus Stylus 80 Operations Instructions download pdf (Page 10)

18 19

1. Open the lens barrier.

Keep the MODE button pressed

until the “year” indicator starts

blinking.

Be sure to correct the date and time after the battery has

been inserted or replaced.

2. Press the SET button to adjust the

“year” indicator. If you press the

button once, the number on the

display will advance by 1. If you

keep the button pressed, the

numbers will run in rapid

succession. If you pass the

intended number, keep pressing to

return to that number.

3. Press the MODE button once more

to make the “month” indicator

blink. Press the SET button to

adjust the “month” indicator. As

you press the MODE button, the

blinking indicator changes in the

order of “year”, “month”, “day”,

“hour” and “minute”.

4. Repeat Steps 2 and 3 to set “hour”

and “minute”. Make sure the

“minute” indicator is blinking.

5. When “minute” has been set, press

the MODE button. None of the

indicators will be blinking and date/

time correction is now complete.

CORRECTING THE DATE AND TIME

(

Quartzdate models only

)

REMOTE CONTROL

RC-300C

1. Turn the screw on the bottom of the

remote control counterclockwise to

loosen.

If the selftimer/remote control indicator doesn’t blink even

when you press the button, replace the battery with a new

one (CR2025).

How to replace the battery of the remote control (RC-300C)

2. Turn the remote control over, and

remove the cover. Remove the old

battery and insert a new battery

with

⊕ facing up as shown.

3. Replace the cover, turn the remote

control over, and turn the screw on

the bottom clockwise to tighten.

RC-300C (Optional)

2758(CS1484)_EN 04.4.28, 2:08 PM18-19

1 2 ... 5 6 7 8 9 10 11 12 13

Comments to this Manuals

No comments

Olympus Stylus 80 Operations Instructions Page 10

Comments to this Manuals

Related products and manuals for Film cameras Olympus Stylus 80