Olympus FL-36R User Manual download pdf (Page 12)

Firing angle

Displayed according to the

focal length of the lens.

Shooting

Let’s try shooting pictures using the TTL AUTO mode. In TTL AUTO

mode the flash intensity is controlled automatically according to the

camera’s settings.

1 Set the camera’s shooting mode to P

(Program Auto).

2 Press the MODE button of the electronic

flash repeatedly to set the flash control

mode to [TTL AUTO].

3 Press the shutter button halfway.

 Shooting information will be communicated

between the camera and the electronic

flash and the light control range will be

displayed on the control panel.

 If the subject is not within the light control

range, adjust the distance to the subject.

 The light control range will vary according

to the camera’s setup (ISO sensitivity,

aperture value and focal length of the lens).

4 Press the shutter button fully.

 When flash activation has been performed

correctly, the AUTO CHECK lamp blinks

for about 5 seconds after the shutter is

released.

Light control

range

Flash control mode

AUTO CHECK

lamp

MODE button

r2067_e_000_cs2j.indb 12r2067_e_000_cs2j.indb 12 2007/10/01 10:49:512007/10/01 10:49:51

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 55 56

No comments

Olympus FL-36R User Manual Page 12