Olympus PT-043 User Manual download pdf (Page 68)

EN 30

Remove any sand, dirt, etc.

After visually checking that dirt has been removed from the O-ring, checks

for sand and other foreign matter adhered, damage and cracks can be

done by squeezing the entire circumference of the O-ring lightly with your

fingertips.

Remove any foreign matter adhered to the O-ring groove using a lint-free

clean cloth or cotton swab. Also remove any sand or dirt adhered to the

O-ring contact surface on the front lid of the case.

CAUTION:

• Maintenance of the waterproof functions is required even before using this

product underwater for the first time.

• When a mechanical pencil or a similar sharp object is used to remove the

O-ring or to clean the inside of the O-ring groove, the Case and the O-ring

may be damaged and water leakage may occur.

• When the O-ring is checked with the fingertips, take care not to stretch the

O-ring.

• Never use alcohol, thinner, benzene or similar solvents or chemical

detergents to clean the O-ring. When such chemicals are used, the O-ring

may be damaged or its deterioration will be accelerated.

PT-043_EN.book Page 30 Friday, December 7, 2007 5:30 PM

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 267 268

No comments

Olympus PT-043 User Manual Page 68