Olympus WS 700M User Manual download pdf (Page 12)

12

1

EN

Power supply

Power supply

Charging by connecting to a

computer via USB

You can charge the batteries by connecting

to a PC's USB port. When charging, be sure

to correctly place the rechargeable batteries

(supplied) into the recorder (☞ P.10 ).

1 Boot the PC.

2 Slide the USB connector slide

lever in the direction indicated

by the arrow to eject the USB

connector out of the recorder.

Do not charge primary batteries such

as alkaline or lithium batteries.It may

cause battery leakage heating and

recorder malfunction.

For WS-710M/WS-700M:

Battery indicator

• When [æ] appears on the display,

replace the batteries as soon as

possible. When the batteries are

too weak, [s] and [Battery Low]

appears on the display and the

recorder shuts down.

Battery settings

Select to match the battery you are using.

1 Replace the battery and switch

on the recorder.

2 Press the + or − button to change

the setting.

[Ni-MH] (õ):

Select when using the Olympus

Ni-MH rechargeable battery (BR401).

[Alkaline] (ú):

Select when using a commercially

available alkaline battery.

3 Press the

OK

`/

MENU

button to

complete the setting.

• If the “Hour” indicator flashes in the

display, see “Setting time and date

[Time & Date]” (☞ P.17 ).

The battery indicator on the display

changes as the batteries loose power.

Note

• When playing a voice/music  le, the

recorder may be reset due to the

reduction of the voltage output of the

batteries depending on the volume level

even if [º] is displayed in the battery

indicator. In this case, lower the volume of

the recorder.

Battery type

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 91 92

Comments to this Manuals

No comments