Olympus E-450 Instruction Manual Page 111

  • Download
  • Add to my manuals
  • Print
  • Page
    / 140
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 110
111
EN
12
Shooting tips and maintenance
Cleaning and storing the camera
Cleaning the camera
Turn off the camera and remove the battery before cleaning the camera.
Exterior:
Wipe gently with a soft cloth. If the camera is very dirty, soak the cloth in mild soapy water and
wring well. Wipe the camera with the damp cloth and then dry it with a dry cloth. If you have used
the camera at the beach, use a cloth soaked in clean water and well wrung.
Monitor and viewfinder:
Wipe gently with a soft cloth.
Lens, mirror and focusing screen:
Blow dust off the lens, mirror and focusing screen with a commercially available blower. For the
lens, wipe gently with a lens cleaning paper.
Storage
When not using the camera for a prolonged period, remove the battery and card. Store the
camera in a cool, dry place that is well ventilated.
Insert the battery periodically and test the camera’s functions.
Cleaning and checking the image pickup device
This camera incorporates a dust reduction function to keep dust from getting on the image
pickup device and to remove any dust or dirt from the image pickup device surface with
ultrasonic vibrations. Dust reduction is activated when the power switch is set to ON and
when starting and stopping live view. The dust reduction function operates at the same time
as the pixel mapping, which checks the image pickup device and image processing circuitry.
Since dust reduction is activated every time the camera’s power is turned on, the camera
should be held upright for the dust reduction function to be effective. The SSWF indicator
blinks while dust reduction is working. g“SSWF indicator” (P. 14)
No indication
SETTINGS
CHANGED
The printer’s paper
cassette has been
removed or the printer
has been manipulated
while making settings
on the camera.
Do not manipulate the
printer while making
settings on the
camera.
No indication
PRINT ERROR
There is a problem
with the printer and/or
camera.
Turn off camera and
printer. Check the
printer and remedy
any problems before
turning the power on
again.
No indication
CANNOT PRINT
Pictures recorded on
other cameras may
not be printed on this
camera.
Use a personal
computer to print.
Camera maintenance
Viewfinder
indications
Monitor indication Possible cause Corrective action
s0029_e_00_0_unified.book Page 111 Monday, March 2, 2009 5:26 PM
Page view 110
1 2 ... 106 107 108 109 110 111 112 113 114 115 116 ... 139 140

Comments to this Manuals

No comments