Olympus PT-EP06L User Manual download pdf (Page 17)

EN 16

Seal the Case

1 Close the Case gently while aligning the mounting projection of the rear lid and groove of the open/close dial.

2 Turn the open/close dial counter clockwise.

• The Case is sealed.

Attach the diffuser

• Do not cap to optical fiber cable insertion slot.

Check the operation of the loaded camera

After sealing the Case, check that the camera operations normally.

• Push the ON/OFF button on the Case and confirm that the camera turns ON/OFF.

• Turn the mode dial knob on the Case and confirm that the camera mode switches properly.

• Press the shutter lever on the Case and confirm that the camera shutter releases.

• Operate the zoom dial on the Case and confirm that the camera’s lens is controlled.

• Operate other control buttons on the Case and confirm that the camera functions properly as intended.

• Push the ON/OFF button of the light and confirm that the light turns ON/OFF.

CAUTION:

• If the open/close dial is not fully turned, the Case will not be sealed. This will cause water leakage.

• Close the rear lid of the Case so that the lens cap or LCD hood strap is not caught. If it is caught, water

leakage may be caused.

PT-EP05L_06L_EN.Book Page 16 Friday, July 15, 2011 10:30 AM

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 26 27

No comments

Olympus PT-EP06L User Manual Page 17