8 EN
Basic guide
2
Place the AF frame on the subject while viewing through the viewfinder
3
Adjust the focus
Press the shutter button gently (halfway).
•
The focus is locked when a beep tone is output. The AF
confirmation mark and the AF focusing frame light up in the
viewfinder.
•
The shutter speed and aperture value that have been set automatically by the camera are
displayed.
•
The control panel screen is not displayed when the shutter button is pressed.
4
Release the shutter
Press the shutter button all the way (fully).
•
The shutter sounds and the picture is taken.
•
The card access lamp blinks and the camera starts recording
the picture.
•
Never remove the battery or card while the card access lamp mark is blinking. Doing so could
destroy stored pictures and prevent storage of pictures you have just taken.
Taking a picture while viewing the monitor
It is possible to use the LCD monitor as a viewfinder and check the subject’s composition, or
shoot while viewing an enlarged display on the LCD monitor.
g
“Live view” (P. 18)
1
Press the
u
(live view) button
•
The subject is displayed on the LCD monitor.
2
Press the shutter button all the way down
•
The picture is taken with the focus adjusted.
Shutter button
Card access lamp
Halfway down
2007.08.16
AF confirmation mark
Aperture value
Shutter speed
All the way down
u button
Comments to this Manuals