Olympus E-P3 Instruction Manual download pdf (Page 95)

Information

Noise reduction is activated

When shooting night scenes, shutter speeds are slower and noise tends to appear in

images. The camera activates the noise-reduction process after shooting at slow shutter

speeds. During which, shooting is not allowed. You can set [Noise Reduct.] to [Off].

g “Customizing camera settings” (P. 81)

The date and time has not been set

The camera is used with the settings at the time of purchase

The date and time of the camera is not set when purchased. Set the date and time before

using the camera. g “Setting the date/time” (P. 7)

The battery has been removed from the camera

The date and time settings will be returned to the factory default settings if the camera is

left without the battery for approximately 1 day. The settings will be cancelled more quickly

if the battery was only loaded in the camera for a short time before being removed. Before

taking important pictures, check that the date and time settings are correct.

Set functions are restored to their factory default settings

When you rotate the mode dial or turn off the power in a shooting mode other than P, A,

S, or M, functions with changes made to their settings are restored to the factory default

settings.

Image taken appears whitish

This may occur when the picture is taken in backlight or semi-backlight conditions. This is

due to a phenomenon called ﬂ are or ghosting. As far as possible, consider a composition

where strong light source is not taken in the picture. Flare may occur even when a light

source is not present in the picture. Use a lens hood to shade the lens from the light source.

If a lens hood does not have effect, use your hand to shade the lens from the light. g

“Interchangeable lenses” (P. 100)

Unknown bright dot(s) appear on the subject in the picture taken

This may be due to stuck pixel(s) on the image pickup device. Perform [Pixel Mapping]. If the

problem persists, repeat pixel mapping a few times.

g “Pixel mapping - Checking the image processing functions” (P. 98)

Functions that cannot be selected from menus

Some items may not be selectable from the menus when using the arrow pad.

Items that cannot be set with the current shooting mode

Items that cannot be set because of an item that has already been set:

Combination of [j] and [Noise Reduct.], etc.

•

1 ... 94 95 96 ... 127

No comments

Olympus E-P3 Instruction Manual Page 95