Olympus TG-3 Instruction Manual download pdf (Page 60)

For the operation method, refer to (P. 41).

Setting functions specifically for tough conditions

d [Tough Settings]

Displaying the current altitude/water depth (atmospheric/hydraulic

pressure) (Manometer)

• The readings may have a margin of error depending on meteorological

conditions. Use the readings only for your reference.

Submenu 1 Submenu 2 Submenu 3 Application

Tough

Settings

Manometer

Off Cancels the manometer display.

Displays the current altitude/water

depth (atmospheric/hydraulic pressure)

in the shooting standby mode screen.

(–20 m to 5,000 m)

Calibrate

Proceed to the setting screen. See

below.

• When set to [On], a cautionary message appears if the water depth reaches

12 m (39.4 ft), followed by a warning if the depth exceeds 15 m (49.2 ft).

To adjust the altitude/water depth display

1 Use FG to select [Calibrate], and press the A

button.

2 Use FG to select the current altitude/water

depth, and press the A button to set.

1200m1200m

Calibrate

Back

Setting the units of elevation, depth, etc. (m/ft)

Submenu 1 Submenu 2 Submenu 3 Application

Tough

Settings

m/ft

m This displays in meters.

ft This displays in feet.

1 ... 59 60 61 ... 118

No comments

Olympus TG-3 Instruction Manual Page 60