Troubleshooting
100
Troubleshooting
Pictures you have already taken do not appear on the monitor.
Possible cause Corrective action Ref. Page
The power is off. Close the lens barrier, then press to turn the
monitor on.
p.17, 61
The camera is in the
shooting mode.
Press quickly twice, or close the lens barrier
and then press to switch to the playback
mode.
p.61
There are no pictures
on the card.
NO PICTURE appears on the monitor.
Record pictures.
–
There is a problem with
the card.
Refer to the “Error codes”. p.96
The camera is
connected to a TV.
The monitor does not function when the Video
cable is connected to the camera.
p.66
The date/time recorded with the image data is wrong.
Possible cause Corrective action Ref. Page
The date/time is not
set.
Set the date/time. The clock adjustment is not
factory-preset.
p.20
The batteries are
exhausted.
When the batteries run out, the date/time setting
is canceled. Replace the batteries with new ones
and set the date/time again.
p.11, 20
The camera has been
left with the batteries
removed.
If the camera is left for several hours with the
batteries removed, the date/time setting is
canceled. Set the date/time again.
p.11, 20
Erasure, protection, print reservation and card formatting cannot be performed
Possible cause Corrective action Ref. Page
A write-protect seal is
attached to the card.
Remove the seal before using the card. Do not
reuse the write-protect seal.
p.14
The settings performed are returned to the factory default settings.
Possible cause Corrective action Ref. Page
All Reset was set to
ON.
Set All Reset in the mode menu to OFF. p.85
Comments to this Manuals