—The red AF illuminator on the front of the
camera will blink rapidly until the shutter is
released.
NOTE: Remote control operation may not be
possible in strong backlight.
Although all operating modes can be
used in conjunction with the remote
control unit, continuous-frame
advance is limited to two frames.
The battery included in the remote
control unit is not possible to replace.
However the battery life is approx five
years.
Remote control operation may be in-
fluenced erroneously by the backlight-
ing through viewfinder.
—The remote control unit functions at distance
up to 5 m (16.4 ft) from the camera within a
arc of about 30° (3.5 m (11.5 ft) to the right
or left of the center of the frame).
—The remote control can be set to release the
shutter either 1 or 3 seconds after the release
button is pressed.
—About 90 seconds after the remote control
mode has been activated, the remote control
indicator on the LCD panel will begin to
blink. If no remote control photographs are
taken within 15 minutes, remote control mode
will be cancelled automatically.
To cancel remote control mode, press the
/remote button, or switch the camera
OFF.
— 34 —
Comments to this Manuals