Olympus FE-4010 User Manual download pdf (Page 31)

31

EN

Select the settings for the functions while referring to “Using the Menu” (p. 3).

Erasing data completely

[MEMORY FORMAT]/[FORMAT]

E

SETUP X MEMORY FORMAT/FORMAT

Before formatting, check that no important

data is left in the internal memory or card.

Non-Olympus cards and cards that have

been formatted by a computer must be

formatted with this camera before use.

Submenu 2 Application

YES

Completely erases the image data

in the internal memory

*1

or card

(including protected images).

NO Cancels formatting.

*1

Be sure to remove the card before formatting the

internal memory.

Copying images in the internal memory

to the card [BACKUP]

E

SETUP X BACKUP

Submenu 2 Application

YES

Backs up image data in the

internal memory to the card.

NO Cancels the backup.

It takes some time to back up data. Check

that the battery has sufﬁ cient power before

starting the backup.

Changing the display language [W]

E

SETUP X W

“Changing the display language” (p. 13)

Submenu 2 Application

Languages

*1

The language for the menus and

error messages displayed on the

monitor is selected.

*1

The available languages vary depending on the

country and/or region where the camera was

purchased.

Adjusting the CCD and the image

processing function [PIXEL MAPPING]

E

SETUP X PIXEL MAPPING

This function has already been adjusted

at factory shipping, and no adjustment is

needed right after purchase. Approximately

once a year is recommended.

For best results, wait at least one minute

after taking or viewing pictures before

performing pixel mapping. If the camera is

turned off during pixel mapping, be sure to

perform it again.

To adjust the CCD and the image

processing function

Press the B button when [START]

(Submenu 2) is displayed.

The camera checks and adjusts the CCD and the

image processing function at the same time.

Turning on the camera with the K or

q button [K/q]

E

SETUP X K/q

Submenu 2 Application

YES

Pressing K turns on the camera

and starts the camera in the

shooting mode.

Pressing q turns on the camera

and starts the camera in the

playback mode.

NO

The power is not turned on. To turn

on the camera, press the n

button.

●

Menus for Other Camera Settings

1 ... 30 31 32 ... 63

Comments to this Manuals

No comments