Olympus Stylus 740 User Manual download pdf (Page 59)

EN 59

Getting to know your camera better

When you get an error message on the camera...

Monitor indication Possible cause Corrective action

q

CARD ERROR

There is a problem with the

card.

This card cannot be used. Insert a new

card.

q

WRITE-PROTECT

Writing to the card is

prohibited.

The recorded image has been protected

(read-only) on a computer. Download the

image to a computer and cancel the read-

only setting.

>

MEMORY FULL

The internal memory has no

available memory and

cannot store any new data.

Insert a card or erase unwanted data.

Before erasing, back up the data of

important pictures using the card, or

download such pictures to a computer.

q

CARD FULL

The card has no available

memory and cannot store

any new data.

Replace the card or erase unwanted data.

Before erasing, download important pictures

to a computer.

L

NO PICTURE

There are no pictures in the

internal memory or on the

card.

The internal memory or the card contains

no pictures.

Record pictures.

r

PICTURE ERROR

There is a problem with the

selected picture and it

cannot be played back on

this camera.

Use image processing software to view the

picture on a computer. If that cannot be

done, the image file is damaged.

r

THE IMAGE

CANNOT BE

EDITED

If pictures taken by other

cameras are selected, they

cannot be edited.

Use image processing software to edit the

pictures.

CARD-COVER

OPEN

The battery compartment/

card cover is open.

Close the battery compartment/card cover.

g

BATTERY EMPTY

The battery is empty. Charge the battery.

This card cannot be used in

this camera. Or, the card is

not formatted.

Format the card or replace.

•

Select [POWER OFF] and press

o

.

Insert a new card.

•

Select [FORMAT] [YES] and press

o

.

All data on the card is erased.

There is an error in the

internal memory.

Select [MEMORY FORMAT] [YES] and

press

o

. All data in the internal memory is

erased.

NO CONNECTION

The camera is not connected

to the printer correctly.

Disconnect the camera and connect it again

correctly.

NO PAPER

There is no paper in the

printer.

Load some paper in the printer.

OK

SET

CARD SETUP

POWER OFF

FORMAT

OK

SET

MEMORY SETUP

POWER OFF

MEMORY FORMAT

[IN]

d4314_15_e.book Page 59 Monday, June 26, 2006 7:13 PM

1 ... 58 59 60 ... 80

Comments to this Manuals

No comments