Olympus VR-350 User Manual download pdf (Page 55)

Usage Tips

If the camera does not work as intended, or if an error

message is displayed on the screen, and you are unsure

of what to do, refer to the information below to ﬁ x the

problem(s).

Troubleshooting

Battery

“The camera does not work even when batteries are

installed”.

● Insert recharged batteries in the correct direction.

“Inserting the battery and card” (p. 11), “Charging the

battery with the included USB-AC adapter” (p. 11)

● Battery performance may have been reduced

temporarily due to low temperature. Take the

batteries out of the camera, and warm them by

putting them in your pocket for a while.

Card/Internal memory

“An error message is displayed”.

“Error message” (p. 56)

Shutter button

“No picture is taken when the shutter button is

pressed”.

● Cancel sleep mode.

To save battery power, the camera automatically

goes into sleep mode and the monitor turns off

if there is no operation for 3 minutes when the

camera is turned on. No picture is taken even if

the shutter button is fully pressed in this mode.

Operate the zoom lever or other buttons to restore

the camera from sleep mode before taking a

picture. If the camera is left for another 12 minutes,

it automatically turns off. Press the n button

to turn the camera on.

● Press the q button to switch to the shooting

mode.

● Wait until #(ﬂ ash charge) stops blinking before

taking pictures.

Monitor

“Difﬁ cult to see”.

● Condensation may have occurred. Turn off the

power, and wait for the camera body to become

acclimated to the surrounding temperature and dry

out before taking pictures.

“Vertical lines appear on the monitor”.

● This condition may occur when the camera is

pointed at an extremely bright subject under a

clear sky and so on. The lines may appear on the

recorded movie.

“The light is caught in the picture”.

● Shooting with ﬂ ash in dark situations results in an

image with many ﬂ ash reﬂ ections on dust in the air.

Date and time function

“Date and time settings return to the default setting”.

● If the batteries are removed and left out of the

camera for about a day

, the date and time

settings return to the default setting, and must

be reset.

The time until the date and time settings return to

the default setting varies depending on how long

the batteries have been loaded.

“Language, date, time, and time zone” (p. 15)

Miscellaneous

“The camera makes a noise when taking pictures”.

● The camera may activate the lens and make a

noise even if no operation is performed. This

is because the camera automatically performs

actions of auto focus as far as it is ready to shoot.

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 76 77

Comments to this Manuals

No comments

Olympus VR-350 User Manual Page 55

Comments to this Manuals

Related products and manuals for Cameras Olympus VR-350