20 EN
Cameras That Do Not Communicate with the FlashCameras That Do Not Communicate with the Flash
AUTOAUTO
Set aperture and ISO sensitivity to the values selected with the camera.
1
Set the fl ash control mode to AUTO.
g “Flash control mode” (p. 11)
2
Match the zoom position to the focal length of the lens.
g “ZOOM” (p. 13)
3
Adjust aperture and ISO sensitivity.
g “Other settings” (p. 17)
If the selected values are out of the fl ash control range, [ISO] and [F] will blink in the display.
The AUTO CHECK lamp blinks for about 5 s after the shutter is released to show that the
fl ash has fi red successfully.
MANUALMANUAL
Choose the guide number.
1
Set the fl ash control mode to MANUAL.
g “Flash control mode” (p. 11)
2
Adjust fl ash level.
g “Other settings” (p. 17)
book_R2191_10L_Eur.indb 20book_R2191_10L_Eur.indb 20 2012/01/13 22:34:082012/01/13 22:34:08
Comments to this Manuals