Olympus SP-310/SP350 User Manual Page 17
- Page / 44
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
E-16
2. Advance Check of the Case
Advance test before use
This Case has been the subject of thorough quality control for the parts
during the manufacturing process and thorough function inspections
during the assembly. In addition, a water pressure test is performed
with a water pressure tester for all products to confirm that the
performance conforms to the specifications. However, depending on
the carrying and storage conditions, the maintenance status, etc., the
waterproof function may be damaged.
Before diving, always perform the following advance test and the water
leakage test after installation of the camera.
Making sure the case is waterproof
Check the parts that ensure the case is waterproof.
1. Make sure that the O-ring between the front and rear lids of the
case is attached firmly and the buckle is tightly secured.
2. Make sure that the O-ring on the TTL cable connector cap is
attached firmly and that the cap is fitted tightly to the connector.
PT_030_EN.qxd 05.10.28 6:34 PM ページE-16
- Underwater Case 1
- Disclaimer 2
- For safe use 2
- Batteries 4
- Setting the camera mode 4
- Handling the Product 6
- Contents 8
- 1. Preparations 10
- Names of the parts 11
- Install the strap 12
- Master the basic operation 12
- Holding the Case 12
- How to Press the Shutter 13
- How to Use the Zoom Lever 13
- How to Use the Mode Dial 13
- Setting the Zoom Lever 14
- How to Use the POWER 14
- Insert into the 15
- connector 15
- 2. Advance Check of the Case 17
- Advance Test 18
- Insert the digital camera 20
- Open the Case 20
- Insertion of silica gel 21
- Set the mode dial 21
- Seal the Case 22
- Check the loading status 22
- Check the camera operation 23
- Installation 24
- Perform the final checks 25
- Visual inspection 25
- Final Test 26
- How to Use the Hand Strap 27
- Take pictures carefully 27
- Caution when using the flash 27
- Underwater shooting modes 28
- Underwater Wide-Angle 1 28
- Underwater Macro 28
- Underwater Wide-Angle 2 28
- 6. Handling After Shooting 30
- Removing the digital camera 31
- Dry the Case 32
- Remove the O-ring 33
- Remove any sand, dirt, etc 33
- Install the O-ring 35
- Replace consumable products 36
- 8. Appendix 38
- Specifications 43
- Technical Support (USA) 44
Related products and manuals for Underwater camera housings Olympus SP-310/SP350
(32 pages)Infloor Radiateurs manuels d'utilisation
À partir de P
Comments to this Manuals