Olympus TG3 User Manual download pdf (Page 21)

A (iAUTO mode)

A full auto mode in which the camera automatically optimizes settings for

the current scene. The camera does all the work, which is convenient for

beginners.

Rotate the mode dial to A.

Press the shutter button halfway down to focus.

The camera was unable to focus if the AF target mark flashes red. Try

focusing again.

Press the shutter button all the way down to shoot.

k (Microscope)

Images can be taken from up to 1 cm away from the subject. In this mode

you can shoot images with a large depth of field, and perform focus bracket

shooting of a set number of images.

Rotate the mode dial to k.

Use HI to select a sub mode and press the A button at the

end.

Sub mode Application

Microscope Images can be taken from up to 1 cm away from the subject.

Focus

Stacking*

The camera shoots a number of images, automatically shifting

the focus in each image. These can then be combined into a

composite image with a large depth of field. Two images are

recorded, the first frame and the composite image.

Focus BKT

In this mode, the camera shoots a number of images,

automatically shifting the focus in each image. The number

of images and shooting steps are set in [Focus BKT settings]

(P. 64).

Microscope

Control

Changes the magnification level of the subject on the monitor.

The magnification level when the shooting distance is 1 cm is

displayed on the monitor. You can change the magnification

level by pressing the I button.*

At high magnification levels,

the image may be grainy.

*1 There may be situations in which it is not possible to create composite image

due to camera shake.

*2 Available only when Picture mode is [Vivid], [Natural] or [Muted].

Press the shutter button all the way down to shoot.

• You can shoot with a fixed focus position. gAFL (P. 34)

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 117 118

No comments

Olympus TG3 User Manual Page 21