Olympus TG835 User Manual Page 10

  • Download
  • Add to my manuals
  • Print
  • Page
    / 101
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 9
10
EN
Position data may be unavailable or contain errors
in the following locations:
Locations without a clear view of the sky
(indoors, underground or underwater, or near
trees or tall buildings)
Locations subject to strong magnetic or radio
interference (near high-voltage power lines,
magnets, electronic devices, or cell phones
operating in the 1.5 GHz band)
GPS data may take more time acquire or be
unavailable in some locations or at certain times
of day.
Do not cover the GPS antenna with your hands or
metal objects.
If the battery is low, the camera cannot acquire
GPS data while the camera turns off.
The camera is not equipped for GPS navigation.
While [Track] is [On], the GPS receiver will
continue to draw power from the battery when the
camera is off.
GPS data are not recorded with movies.
Press the INFO button while the camera is turned
off. The current time and the shooting location are
displayed for approx. 30 seconds.
Learning how to use the
camera
Press the n button to turn on the camera and
enter the standby mode. (Press the n button
again to turn off the camera.)
Select the shooting mode, and press the shutter
button to shoot a still image.
To shoot a movie, press the R button.
Set the shooting functions using the function
menu or the setup menu.
To view images, press the q button to switch to
playback mode.
To return to standby mode, press the q button
again, or press the shutter button halfway down
and then release it.
Press and hold the q button while the camera is
turned off to start up the camera in the playback
mode.
In this case, pressing the q button again sets
the camera to the standby mode.
Page view 9
1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 100 101

Comments to this Manuals

No comments