Olympus SP-720UZ Instruction Manual download pdf (Page 49)

For details on changing the input source of the TV, refer to the TV’s instruction manual.

When the camera and TV are connected by both an AV cable and an HDMI cable, the HDMI cable will take priority.

Depending on the TV’s settings, the displayed images and information may become cropped.

To operate images with the TV remote control

1 Set [HDMI Control] to [On], and turn off the camera.

2 Connect the camera and TV with an HDMI cable. “Connection via HDMI cable” (p. 48)

3 First turn on the TV, and then turn on the camera.

● Operate by following the operation guide that is displayed on the TV.

With some TVs, operations cannot be performed with the TV remote control even though the operation guide is

displayed on the screen.

If operations cannot be performed with the TV remote control, set [HDMI Control] to [Off] and operate using the

camera.

Saving battery power between shots

[Power Save]

d (Settings Menu 2)  Power Save

Submenu 2 Application

Off Cancels [Power Save].

When the camera is not being used

for approx. 10 seconds, the monitor

automatically turns off to save

battery power.

To resume standby mode

Press any button.

Changing the display language [

]

d (Settings Menu 2)  l

Submenu 2 Application

Languages

The language for the menus and

error messages displayed on the

monitor is selected.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 75 76

No comments

Olympus SP-720UZ Instruction Manual Page 49