Olympus EVOLT E-500 User Manual download pdf (Page 24)

Shooting

Set the mode dial to AUTO.

1 Place the AF frame on the subject while

viewing through the viewfinder.

2 Adjust the focus.

Press the shutter button gently (halfway).

• The focus is locked. The AF

confirmation mark and the AF focusing

frame light up in the viewfinder.

• The shutter speed and aperture value

that have been set automatically by the

camera are displayed.

• The control panel screen is not

displayed when the shutter button is

pressed.

• When you use the camera in the dark,

the flash pops up automatically if the

camera is set to AUTO.

3 Release the shutter.

Press the shutter button all the way (fully).

• When a picture is taken, a shutter sound is output.

• The card access lamp blinks and the camera starts recording the picture.

• After 1 minute* without any operation being performed, the monitor turns off

and the camera stops operating. To wake up the camera, simply press any

button, e.g. the shutter button. After about 4 hours* without being used, the

camera will turn off automatically. Turn on the camera again.

* Factory default settings. You can change the time settings using the custom

menu.

Shutter button

Card access lamp

AF frame

Viewfinder

Halfway down

AF confirmation mark

All the way down

s0004_oe_Basic.book Page 24 Friday, September 16, 2005 6:51 PM

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 115 116

No comments

Olympus EVOLT E-500 User Manual Page 24