Olympus PT-E05 User Manual download pdf (Page 67)

EN 26

Check the operation of the loaded camera

After sealing the Case, check that the camera functions normally.

• Operate the power switch lever on the Case and confirm that the camera can be turned ON/OFF.

• Turn the mode dial knob on the Case and confirm that the camera mode switches properly.

• Operate the shutter lever on the Case and confirm that the camera shutter is released.

• Operate the zoom dial on the Case and confirm that the camera’s lens is controlled.

• Operate other control buttons on the Case and confirm that the camera functions properly as intended.

Perform the final checks

Visual Inspection

After closing the case tightly, check the seal between the front and rear lids and the connection between

the port and case to make sure the O-rings are not twisted, that they sit properly in the grooves, and that

no foreign matter has been caught between the two parts.

CAUTION:

• If the camera does not function properly, remove the camera and reload it, starting from “Check the digital

camera” (P. 16) of this manual.

• After loading the camera in the Case, confirm that the Case’s mode dial can be rotated.

If not, the Case’s mode dial may not be positioned properly on the camera’s mode dial. Set the mode dials

properly.

CAUTION:

Hair, fiber, and other narrow items are not very apparent, but they may cause entry of water, therefore special

attention is required.

PT-E05_EN.Book Page 26 Tuesday, June 17, 2008 11:11 AM

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 283 284

No comments

Olympus PT-E05 User Manual Page 67