Editing still pictures
Playback
6
107
1 Turn the control dial to select the still picture you want to
edit, and press Z.
2 Use the arrow pad, zoom lever
and control dial to decide the
trimming position and size.
•Press acbd to select the trimming
frame, and move the zoom lever toward
W or T to decide the trimming size.
• Use the control dial to select the height
and width of the trimming frame.
• 3:2 trimming size can be selected when
the size of the selected picture is 3,072
× 2,304, or 3,072 × 2,048.
3 Press Z.
4 Press ac to select the card, and press Z.
• If only one card is inserted, skip this step.
• When there is insufficient card memory, the display returns to the setting
screen.
5 Select [OK], and press Z.
• The [BUSY] bar is displayed. After the
image is saved, the camera returns to
Step 1.
• The trimmed picture is stored as a
separate picture from the original.
• If you want to trim the picture again,
select [RESET] and press Z. Repeat
the procedure from Step 2.
• To quit the trimming function, select [CANCEL] and press Z.
Note
• Trimming is not possible in the following cases.
Movies, pictures taken in raw data format, or when there is insufficient
memory space on the card.
• If a trimmed picture is printed, it may appear grainy.
OK
OK
GO
GO
OK
OK
GO
GO
OK
RESET
CANCEL
GO
OK
SELECT
GO
OK
SELECT
Comments to this Manuals