Olympus DS-2500 User Manual download pdf (Page 56)

Connecting recorder to PC

Connecting to your PC using the USB cable

1 Boot the PC.

2 Connect the USB cable to the USB port of the PC.

3 Connect the USB cable to the connecting terminal on the

bottom of the recorder.

• [ Remote (Composite) ] is displayed on the recorder if the USB cable is

connected.

Once you connect the recorder to your PC, the recorder will be powered

through the USB cable.

While PC connection, the SD card is recognized as the respective

removable disk drive.

Notes

• NEVER remove the card or disconnect the USB cable while the record

indicator light is ﬂ ashing. If you do, the data will be destroyed.

• Some PC’s may not supply suﬃ cient power and the recorder fails to

connect. Refer to your PC user’s manual regarding the USB port on your

PC.

• Do not connect the recorder to a PC by using a USB hub. Make sure to

connect to a USB port on your PC.

• Make sure to push the cable connector all the way in. Otherwise, the

recorder may not operate properly.

Connecting recorder to PC

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 64 65

No comments

Olympus DS-2500 User Manual Page 56