Olympus SP-550 UZ Instruction Manual download pdf (Page 69)

100

EN 69

Getting to know your camera better

When you get an error message on the camera

Monitor indication Possible cause Corrective action

CARD ERROR

There is a problem with the

card.

This card cannot be used. Insert a new

card.

WRITE-PROTECT

Writing to the card is

prohibited.

The recorded image has been protected

(read-only) on a computer. Download the

image to a computer and cancel the read-

only setting.

MEMORY FULL

The internal memory has no

available memory and

cannot store any new data.

Insert a card or erase unwanted data.

Before erasing, backup the data of

important pictures onto the card, or

download such pictures to a computer.

CARD FULL

The card has no available

memory and cannot store

any new data.

Replace the card or erase unwanted data.

Before erasing, download important

pictures to a computer.

NO PICTURE

There are no pictures in the

internal memory or on the

card.

The internal memory or the card contains

no pictures.

Record pictures.

PICTURE ERROR

There is a problem with the

selected picture and it

cannot be played back on

this camera.

Use image processing software to view the

picture on a computer. If that cannot be

done, the image file is damaged.

THE IMAGE CANNOT

BE EDITED

If pictures taken by other

cameras are selected, they

cannot be edited.

Use image processing software to edit the

pictures.

CARD-COVER OPEN

The card cover is open. Close the card cover.

BATTERY EMPTY

The battery is empty. Insert new batteries. When using

rechargable batteries, charge the

batteries.

Recording has

stopped to allow

camera to cool.

Please wait a

moment.

When [IMAGE STABILIZER]

is set to [ON], the camera's

internal temperature rises

due to continuous movie

recording for a long period,

thereby causing shooting to

stop.

Allow the camera to cool down for some

time before you begin shooting again. Or

you can shoot with [IMAGE STABILIZER]

set to [OFF].

Camera is cooling.

Please wait a

moment.

This card cannot be used in

this camera. Or, the card is

not formatted.

Format the card or replace.

• Select [POWER OFF] and press o.

Insert a new card.

• Select [FORMAT][YES] and press

o. All data on the card is erased.

SET

CARD SETUP

POWER OFF

FORMAT

[xD]

d4321_e_unifild_Print_00_bookfile.book Page 69 Tuesday, December 19, 2006 11:20 AM

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 99 100

Comments to this Manuals

No comments

Olympus SP-550 UZ Instruction Manual Page 69

Comments to this Manuals

Related products and manuals for Camcorders Olympus SP-550 UZ