Olympus PT-022 User Manual download pdf (Page 35)

E-34

Replace consumable products.

 The O-ring is a consumable product. Independent of the number of

times the Case is used, it is recommended that the O-ring should

be replaced by a new one at least once a year.

 Deterioration of the O-ring is accelerated by the use conditions and

the storage conditions. Replace the O-ring even before a year has

passed if it shows signs of damage, cracking or loss of elasticity.

Note: •

Please use original Olympus products for the silicone O-ring

grease, the silica gel, and the O-ring. These consumable

products also can be purchased at an Olympus service station.

O-ring

Insert the adapter by aligning its pin with

the hole on the cap.

Turn the adapter counterclockwise to

remove the O-ring unit.

After removing the O-ring attached to the

O-ring unit, clean the O-ring groove and

apply silicon grease to the O-ring. Then,

re-attach the O-ring to the O-ring unit.

❈ Reverse the removal procedure to re-attach the O-ring unit to the

waterproof cap.

PT_022_E.qxd 2004.3.18 4:34 PM ページE-34

1 ... 34 35 36 37 38 39 40 41 42 43

No comments

Olympus PT-022 User Manual Page 35