Olympus STYLUS TOUGH-8000 User Manual download pdf (Page 48)

48

EN

Saving battery power between shots

[POWER SAVE]

E SETUP X POWER SAVE

Submenu 2 Application

OFF Cancels [POWER SAVE].

ON

When the camera is not being

used for approx. 10 seconds, the

monitor automatically turns off to

save battery power.

To resume standby mode

Press any button or turn the mode dial.

Using the LED illuminator as an

auxiliary light [LED ILLUMINATOR]

E SETUP X LED ILLUMINATOR

Submenu 2 Application

OFF Disables the LED illuminator.

ON Enables the LED illuminator.

“Using the LED illuminator” (p. 24)

Displaying the current altitude/

water depth (atmospheric/hydraulic

pressure) [MANOMETER]

E SETUP X MANOMETER

The readings may have a margin of error

depending on meteorological conditions.

Use the readings only for your reference.

Submenu 2 Application

OFF Cancels the manometer display.

ON

Displays the current altitude/

water depth (atmospheric/

hydraulic pressure) in the

shooting standby mode screen.

(–10 m to 5,000 m)

CALIBRATE

Proceed to the setting screen.

See below.

When set to [ON], a warning message

appears in the monitor as a water depth

close to 10 m (32.8 ft) is reached.

To adjust the altitude/water depth

display

1 Use 12 to select the current altitude/

water depth, and press the o button to

set.

1200m

CALIBRATE

SET

OK

MENU

BACK

Selecting the display units for the

manometer [m/ft]

E SETUP X m/ft

Submenu 2 Application

m This displays in meters.

ft This displays in feet.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 85 86

Comments to this Manuals

No comments