Olympus DS-333 User Manual download pdf (Page 50)

Connecting to Your PC

Be sure to finish installing DSS Player before connecting the recorder. If you connect the recorder

before installing DSS Player, the “Add New Hardware Wizard” dialog box will open. If this happens,

click on [Cancel] to exit the wizard, then install DSS Player.

Once you connect the recorder to your PC, the included USB cable will supply the power so you

will not have to use batteries or an AC adapter with the recorder.

You can directly connect the recorder's USB terminal to your PC, or use the cradle included in the

package (desktop holder).

Connecting to your PC using the USB

connection cable

Insert end A of the USB cable to your

PC's USB port or USB hub.

Confirm that the recorder is not in

use before attaching end b of the

USB cable to the PC terminal port

of the recorder.

“REMOTE” is displayed on recorder if the

USB cable is connected.

······················································································································································

Notes

• NEVER disconnect the USB connecting cable while the record/play indicator lamp is flashing. If you do, the

data will be destroyed.

• Some PCs and USB hubs may not supply sufficient power and the recorder may not connect. If that happens,

turn the USB AUDIO "OFF" in the recorder's menu settings. (☞ P.41)

• Refer to the user's manual for your PC regarding the USB port or USB hub on your PC.

• Be sure that you connect the USB cable either directly to the USB port on your PC or the self-power (AC

adapter connection) USB hub.

• Be sure to push the cable connector all the way in. Otherwise, the recorder may not operate properly.

• Release the HOLD switch. (☞ P.9)

REMOTE

Connecting to Your PC

1 ... 49 50 51 ... 76

Comments to this Manuals

No comments

Olympus DS-333 User Manual Page 50

Comments to this Manuals

Related products and manuals for Car DVR Olympus DS-333