Olympus LS-3 Specifications download pdf (Page 54)

54

4

EN

Menu setting method

Menu setting method

a

V-Sync. Rec

Voice sync recording starts when a voice

louder than the voice sync level (detection

level) is detected. When the voice becomes

low, recording will automatically stop.

When voice sync recording is on and the

input level falls below the voice sync level

(detection level) for a period of at least the

specified detection time, the recorder will

return to the standby mode.

1 Select [On] or [Off].

[On]: Enables the Voice sync recording

function.

[Off]: Disables this function.

• If you select [On], proceed to the

operation of Step 2.

2 Sets the detection time.

[1 second] [2 seconds] [3 seconds]

[4 seconds] [5 seconds] [10 seconds]:

• If the input (recording level) is equal

to or below the specified level for

longer than the specified detection

time, the recorder will return to the

standby mode.

Adjust the voice sync level:

1 Press the REC (s) button to start

recording.

• To use voice sync recording, set

[V-Sync. Rec] to [On] and specify a

detection time.

2 Press the 9 or 0 button to

adjust the voice sync level.

• The voice sync level can be set to any

of 23 different values.

• The higher the value, the more

sensitive the recorder will be to

sounds. At the highest value, even the

faintest sound will activate recording.

a Voice sync level (moves to the

right/left according to the set level)

3 Press the REC (s) button again.

• The recorder will go into standby.

[Standby] will flash on the display

and the recording indicator light will

flash.

• When the input is at or above the

voice sync level, recording will start

automatically.

4 Voice sync recording stops

automatically.

• If sound at a volume below the voice

sync level continues for the specified

time, voice sync recording will end

automatically, and the recorder

will return to the standby mode of

Step 3. Every time the recorder enters

standby mode, the file will be closed

and recording will continue in a

different file.

• To stop the recorder during voice

sync recording, press the STOP (4)

button.

• When using the [V-Sync. Rec] function,

the following functions are not available.

• [VCVA] (☞ P.53)

• [Pre-Recording] (☞ P. 56)

Timer Rec

See “Timer recording [Timer Rec]” (☞ P.67).

1 ... 53 54 55 ... 103

Comments to this Manuals

No comments