Olympus LS-3 Specifications download pdf (Page 71)

71

4

EN

Menu setting method

Menu setting method

• Select the folder using the + or

– buttons and press the `OK button

to move to file selection. Use the + or

– button to select the file in the same

way.

2 Press the `OK button to exit [Playback

File] selection.

6 Press + or − button to select

[Finish].

• Programmed settings will be applied

and the display will return to the

preset number selection menu.

• To set other preset numbers, repeat

the above mentioned procedure.

• When the 9 button is pressed

in the Select in Advance Menu, the

settings selected can be confirmed.

8 Press the F2 (EXIT) button to

close the menu screen.

• The [A] will appear on the display.

When setting to [ON]

Notes

• If [Everyday] is selected, the alarm will

sound at the scheduled time every day

unless alarm playback is canceled.

• The alarm will sound for five minutes and

then stop. In such a case, even if a file is

selected for Alarm Playback, it will not be

automatically played.

• If three alarm playback have the same

starting times, [Preset 1] has the highest

priority and [Preset 3] has the lowest.

• If the recorder is in use or if operations are

being performed at the scheduled time,

the Alarm Playback function will not be

available.

• The alarm will sound at the scheduled

time even if the power is turned off or

the recorder is set to Hold mode. The

recorder begins to play the selected file

when you press any button, and stops

playing when you press the STOP (4)

button.

• If the selected file is moved, erased or the

microSD card removed, file playback will

not be performed and only the alarm will

sound.

• If the starting times for timer recording

and alarm playback are set for the same

time, timer recording will have priority

(☞ P.67).

• If the recorder is formatted (☞ P.74), a larm

data will also be erased, so you won’t be

able to set an alarm. When the data has

been erased by accident, connect to PC

and copy the alarm sound data to the

recorder by using the supplied “Olympus

Sonority” (☞ P.8 3).

7 Press the `OK button to

complete the setting.

1 ... 70 71 72 ... 103

Comments to this Manuals

No comments