Olympus CAMEDIA P-200 User Manual download pdf (Page 34)

Setting up the printer

Connecting the power supply

To supply power from the provided AC adapter

1. Plug the printer power cord into the AC adapter.

2. Plug the AC adapter power cord into a wall outlet,

then plug the other end of the printer power cord

into the printer's DC power input connector.

3. Press and hold the POWER button for more than 1.5

seconds.

4. The printer turns ON with a beep tone, and the

control panel is displayed.

5. To turn the printer OFF, press and hold the POWER

button for more than 1.5 seconds. The control panel

will turn off and the printer turns OFF with a short

beep.

If you want to use the AC adapter as the power

supply to the printer, remove the rechargeable

battery if possible. This will help prevent deteriora-

tion of the rechargeable battery.

If the printer power cord is accidentally unplugged

from the printer during printing, turn the printer

OFF, plug the printer power cord into the printer's

DC power input connector, and then turn the printer

ON again. Leaving the printer unplugged in printing

mode may cause it to malfunction.

Setup

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 67 68

No comments

Olympus CAMEDIA P-200 User Manual Page 34