Olympus CAMEDIA P-200 User Manual download pdf (Page 36)

4. Remaining battery power indication

The remaining battery power is indicated for 12

seconds after the printer is turned ON and during

printing.

The remaining battery power indicator segments light

according to the following.

lights (turns off automatically): The battery is

fully charged. You can print.

lights (turns off automatically): The remaining

battery power is sufficient. You can print.

lights (turns off automatically): The remaining

battery power is too low. A few pages may be

printed but battery power may run out before

printing is complete.

lights: No remaining battery power. Turn the

printer OFF and recharge the battery.

5. Removing the battery

Turn the printer OFF and make sure that the AC

adapter is not connected.

Slide the battery unlock lever toward the paper feed

cassette position (by about 2 mm), then remove the

battery by sliding it in the opposite direction from

when it was installed.

Install the rear cover in the same way as installing the

battery. Store the removed battery with the provided

cover installed to it.

Using print packs

Notes

• Always use the ink

ribbon cartridge and

print paper supplied

together in the same

carton.

• Do not print on used

print paper.

You need the provided sample kit or an optional print

pack (set of ink ribbon cartridge and print paper) for

printing.

Setup

Purpose

(Printing)

Print Pack

Print Paper

Ink Ribbon

Cartridge

Standard

P-25N

Standard

For 25 prints

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 67 68

Comments to this Manuals

No comments

Olympus CAMEDIA P-200 User Manual Page 36

Comments to this Manuals

Related products and manuals for Multifunctionals Olympus CAMEDIA P-200