Olympus SZX10 User Manual download pdf (Page 10)

SUMMARY OF OBSERVATION PROCEDURE

Ref. Page

1. Check and tighten the connection of each component, especially the observation tube. ............................................(Page 19)

2. Check that the angled formed by the microscope body with respect to the base is less

than the turning-over prevention angle.................................................................................................................................................................................................(Page 18)

3. Adjust the rotation tension of the coarse focus adjustment knob....................................................................................................................... (Page 7)

4. Confirm the correct settings.

3-1 Preparation

3-2 Observation Procedure

4. Set the zooming knob @ to the lowest zoom magnification and bring the

microscope into focus by rotating the coarse focus adjustment knob ².

5. Rotate the zooming knob @ to the desired magnification and precisely

focus the microscope on the specimen with the coarse focus adjust-

ment knob ² and fine focus adjustment knob ³ (the fine focus adjust-

ment knob is not provided with the SZX2-FO).

}The contrast of the observed image and the focal depth of the specimen

can be adjusted with the aperture iris diaphragm ring.

1. Place a specimen on the stage. (Page 7)

2. Adjust the interpupillary distance. (Page 9)

3. Make diopter adjustment of the eyepieces. (Page 9)

(The adjustment procedure is variable depending on whether the eye-

piece micrometer disk is used or not.)

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 35 36

Comments to this Manuals

No comments

Olympus SZX10 User Manual Page 10

Comments to this Manuals

Related products and manuals for Optical devices Olympus SZX10