Olympus CAMEDIA E-10 User Manual download pdf (Page 12)

12

SmartMedia CompactFlash

ON

OFF

DC IN jack

AC adapter power cord

plug

AC adapter

Power outlet

Connecting the AC Adapter

Use the optional AC adapter as an alternate

power source for long shooting sessions in

order to conserve battery power. Switch the

camera off and make sure that the card access

lamp is not blinking. Plug the AC adapter power

cord into a power outlet. Remove the DC IN

jack cap on the left side of the camera and

connect the AC adapter to the camera, and

then switch on the camera. Use only the AC

adapter intended for use with this camera. For

details about using the AC adapter in any

country other than where you purchased the

camera and AC adapter, contact an Olympus

Service Center.

Inserting and Selecting Memory

Cards

Memory cards, hereafter referred to simply as

“cards”, store the digital images of the pictures

that you take with the camera. The camera can

hold one SmartMedia (SM) and one

CompactFlash (CF) media card.

You can use Olympus or any other brand 3V

(3.3V) SmartMedia memory card (5V cards

cannot be used).

Make sure that the card access lamp is off.

Press down on the card cover lock and raise it,

and then open the card cover. To insert a

SmartMedia card, hold it with the notched

corner down and insert it into the narrow slot

closest to the rear of the camera. Push the card

completely into the slot. (Insert the SmartMedia

card until you can see above 2 mm of the card

above the edge of the slot.)

To insert the CompactFlash card, hold it with

the arrow facing the rear of the camera and

insert it into the wide slot closest to the front of

the camera. Push the card completely into the

slot. Close the card cover and press it gently

until it locks.

To remove the SmartMedia card, press on it

gently to release it then remove it from its slot.

To remove the CompactFlash card, gently

press the eject button to release it then remove

it from its slot.

When one card is installed in the camera, that

card is automatically selected to store images.

With both cards installed, you can select either

card for storage. When one card becomes full,

you can quickly switch to the other card and

continue shooting. Press and hold down the

SM/CF memory card button, and then slowly

turn the main dial or sub dial until you see

(SmartMedia) or (CompactFlash) displayed

in the control panel. When you see , the

SmartMedia card is selected for image storage,

and when you see , the CompactFlash card

is selected.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 117 118

Comments to this Manuals

No comments