Olympus CAMEDIA E-10 User Manual download pdf (Page 20)

20

Selecting Images for Printing

You can select images one by one or select all

images on the card for printing on a DPOF

compatible printer or printing by a DPOF

printing service.

To select single images for printing

Insert and select the card with the images that

you want to select for printing. Set the mode

dial to print reserve mode . Use the arrow

pad to display the image that you want to select

for printing, and then press the button. Press

or to select the number of copies that you

want to print, and then press the button. The

image is marked with the print reserve mark

and the number of copies that you have

selected. Repeat this procedure to select and

mark more images for printing. Reset the mode

dial to leave the print reserve mode. To cancel a

selection, repeat this procedure and select zero

for the number of copies.

To select or cancel all images for printing

Insert and select the card with the images that

you want to select for printing. Set the mode

dial to print reserve mode , and then press

the menu button . Use the print reserve item

on the print reserve mode menu to select

or clear all images on the card for printing.

To select images for date or time stamping

Insert and select the memory card that

contains the images that you want to select for

date or time stamping. Set the mode dial to

print reserve mode , and then press the

menu button . In the print reserve mode

menu use the Date or Time Stamping item

to set date or time stamping for the image.

To select or cancel index printing

Insert and select the memory card that

contains the images that you want to select for

index printing. Set the mode dial to print

reserve mode , and then press the menu

button . In the print reserve mode menu, use

the Index Printing item to select or clear all

previous selections for printing.

Reading Images with a Computer

You can use the USB cable provided with the

camera to connect the camera to a computer

equipped with a USB interface and read

images from either card in the camera with the

computer. The following equipment is required:

• A USB cable provided with the camera.

• A USB driver. A USB driver is provided with

CAMEDIA Master 2.5. The most recently

updated USB drivers are available from the

Olympus Home page at www.olympus-

europa.com or contact an Olympus Service

Center.

• An IBM compatible PC/AT with Windows 98,

Windows 98 Second Edition, or Windows

2000 installed.

• An Apple Macintosh or iMac with Mac OS 8.6

to 9.0 installed.

For more details refer to the software CD’s

Reference Manual on CD-ROM.

Optional Devices for Reading Cards

You can also use one of the optional devices to

read image files from a memory card if your

computer is not equipped with a USB port.

Before you purchase one of these optional

devices, make the device can be used with

your computer. For more details, contact an

Olympus Service Center.

To read a SmartMedia card

• Floppy Disk Adapter FlashPath MAFP-2NE.

A 3.5-inch floppy disk drive is required.

• PC Card Adapter MA-2E. A PCMCIA card

slot is required on your computer.

• SmartMedia Reader/Writer MAUSB-2. A

USB connector is required.

To read a CompactFlash card

• PC Card Adapter. A PCMCIA card slot is

required.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 117 118

Comments to this Manuals

No comments