Olympus CAMEDIA E-20 User Manual download pdf (Page 20)

Setting Factory-set Factory-set

Resolution Compression

(no. of pixels)

RAW 2560 x 1920 1:1(not compressed)

TIFF 2560 x 1920 1:1(not compressed)

SHQ 2560 x 1920 1:2.7

HQ 2560 x 1920 1:8

SQ 1280 x 960 1:8

balance mode button , turn the main dial or

sub dial until you see -A- in the viewfinder and

control panel, or AUTO WB in the monitor,

and then take the picture.

• Quick reference (one touch) white balance.

Under the same light source where you intend

to take the picture, point the camera at a

white surface (wall, sheet of paper, etc.), fill

the viewfinder with the white surface, and

then press the quick reference white balance

button on the front of the camera. When

you see GOOD displayed in the monitor,

press the button to save the setting. Press

and hold down the white balance mode button

, and then turn the main dial or sub dial to

zero for the color temperature setting. Then

take the picture. If you see NO GOOD, this

means that not enough white surface was

available, the white surface reflected too

much light, or color around the corners of the

sheet interfered with the registration.

• Preset white balance. Hold down the white

balance mode button , and then turn the

main dial or sub dial until you see the desired

color temperature setting, and then release

the button. Select AUTO, a color

temperature setting in the range 3000K to

7500K, or Quick Reference.

Setting the Record Mode

The record mode settings determine the quality

of the images and also affects the file sizes.

The better the quality, the larger the file size.

Hold down the record mode button , and then

turn the main dial or sub dial to the left until you

see the desired setting in the control panel

[Blinking TIFF (indicates RAW), TIFF, SHQ, HQ

(default), and SQ], or turn to the right to display

them in reverse order. RAW and TIFF can be

set only in the IS mode.

TIFF, SHQ, HQ, and SQ respectively stand for

“Tagged Image File Format,” “Super High

Quality,” “High Quality,” and “Standard Quality.”

RAW indicates the raw output from the CCD. To

display RAW data files on your PC, CAMEDIA

Master software or Photoshop is required.

(Photoshop requires the Olympus RAW File

Import Plug-in included in the software CD.)

* The resolution and compression for a record

mode can be customized using the menu.

Adjusting Sharpness

You can select HARD, NORMAL, or SOFT for

the sharpness setting using the menu.

Adjusting Contrast

You can select HIGH, NORMAL, or LOW to

adjust the amount of gradation between areas of

different brightness in the image using the menu.

Using the Noise Reduct

(Noise Reduction Mode)

Use this mode to reduce the amount of noise that

appears in images when shooting night scenes or

other shots that require a long exposure time. The

noise reduction function operates only when you

are shooting with the shutter speed set slower

than 1/2 or in the bulb shooting mode.

Taking Sequential Exposures

(Burst Mode)

With the burst mode, press and hold down the

shutter button to take rapid shots. In IS mode

you can take up to three or four sequential shots

(depending on the record mode). In PS mode

you can take up to seven sequential shots.

Set the mode dial to P, A, S, or M, and then

hold down the drive button until you see the

sequential mode mark in the control panel.

Press and hold down the shutter button. The

camera will take sequential shots until you

release the shutter button. The pictures are

taken at the same exposure, while bracketing

exposures takes multiple pictures at different

exposures.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 115 116

Comments to this Manuals

No comments

Olympus CAMEDIA E-20 User Manual Page 20

Comments to this Manuals

Related products and manuals for Bridge cameras Olympus CAMEDIA E-20