Olympus PT-024 User Manual download pdf (Page 17)

E-16

Load the digital camera.

Quietly load the digital camera into the Case, taking care that the

projecting part of the zoom lever of the digital camera properly fits

into the recessed part of the zoom lever of the Case.

Setting the Zoom Lever

When loading the digital camera in the Case, fit the projecting part

of the zoom lever of the digital camera into the recessed part of the

zoom lever on the inside of the Case.

:•When loading the camera, confirm that the projecting

part of the zoom lever of the camera is properly set to

the recessed part of the zoom lever of the Case.

• When the setting is insufficient, the loading of the

camera becomes imperfect and it may not be possible

to seal the Case or zooming may not function.

Insufficient sealing will cause water leakage.

CAUTION

Set the mode dial.

After the digital camera has been

loaded, push down the mode dial

of the case from the upper surface

of the case and set it so that the

lower part of the mode dial of the

case on the inside of the case fits

properly onto the upper part of the

mode dial of the digital camera.

Advice

• After properly fitting the case's mode dial knob, turn the

knob to make sure that the camera's mode dial switches

before closing the case tightly.

PT024_E.qxd 2004.4.20 10:33 AM ページE-16

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 36 37

No comments

Olympus PT-024 User Manual Page 17