Transferring images to a computer
148
Connecting the camera to your computer using the cable
11
Connecting the camera to your computer requires the use of the USB cable or IEEE
1394 cable. The camera’s PC MODE should be set beforehand to STORAGE.
~ “PC MODE” (P. 133)
1
Insert the cable into the port on your computer.
2
Make sure that the power switch is set
to
OFF, then insert the cable into the
connector on the camera.
3
Set the camera’s power switch to ON.
● Nothing is displayed on the control panel of the
camera while it is being connected to the
computer.
USB IEEE1394
USB port
Look for this mark.
Terminal
IEEE1394 (FireWire) port
Terminal
Power switch
Note
● Do not connect both the USB cable and IEEE1394 cable to the camera at the same
time.
IEEE1394: IEEE1394 connector
USB: USB connector
Smaller terminal
Smaller terminal
Comments to this Manuals