Olympus CAMEDIA P-200 User Manual download pdf (Page 35)

Notes

• Recharging time varies

depending on the

remaining battery power

and environmental

conditions.

• Even when the battery is

installed, it is not

recharged while the

printer is set to ON.

Recharging only takes

place when the printer is

OFF.

• Once you started

recharging, it is

recommended that you

fully recharge the battery

without interruption. (Do

not turn the printer ON

or OFF during

recharging.)

• When a fully discharged

battery is recharged, a

pre-charging period of

up to 1 minute takes

place before the

ACCESS/CHARGE

indicator lights up. (The

indicator does not light

in the pre-charging

period.)

To supply power from the optional rechargeable

battery

1. Installing the battery

1) Turn the printer OFF and unplug the AC adapter

power cord.

2) Remove the rear cover.

3) Position the battery so that the marking on the

battery points in the same direction as the one on the

printer. Align the battery with the printer as shown in

illustration 3), then push the entire battery toward the

printer.

4) While pushing the battery against the printer, slide the

battery toward the battery unlock lever until it clicks.

2. Recharging the battery

1) Connect the AC adapter.

2) The ACCESS/CHARGE indicator lights to indicate

that recharging has started.

3) Recharging takes about 2.5 hours. The ACCESS/

CHARGE indicator turns off when recharging is

complete.

3. Battery power operation

1) Disconnect the AC adapter from the printer and turn

the printer ON.

When the AC adapter is connected, the printer is

always powered by the AC adapter.

The control panel shows the remaining battery power.

Setup

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 67 68

Comments to this Manuals

No comments

Olympus CAMEDIA P-200 User Manual Page 35

Comments to this Manuals

Related products and manuals for Multifunctionals Olympus CAMEDIA P-200