Olympus PPO-E04 User Manual download pdf (Page 15)

E-3

When using the ZUIKO DIGITAL ED 7-14 mm lens, the separately available PER-E02 Underwater

Extension Ring should be mounted between the PPO-E04 and PT-E series Underwater Case. Before

mounting, make sure that no foreign matter is attached to the O-rings, O-ring contact surfaces, port mount

threads and threaded sections of the three modules. After this, apply thin layers of the provided silicone O-

ring grease on these parts.

2) When using the ZUIKO DIGITAL ED 7-14 mm lens



Align the threaded section of the PER-E02 extension ring with the port mount thread on the PT-E series case.



Hold the PT-E series case firmly with one hand, hold the main body of the PER-E02 extension ring with

your other hand and screw it into the PT-E series by turning the extension ring clockwise.



Resistance increases as the PER-E02 extension ring is screwed in more deeply. However, be sure to screw it in all

the way until there is no gap visible between the case’s port mount thread and the extension ring’s threaded section.

If the resistance is extremely high, apply some more silicone O-ring grease again to surfaces listed above.



Align the lens port mount thread of the PER-E02 extension ring with the threaded section on the PPO-E04.



Hold the PT-E series case and PER-E02 extension ring firmly with one hand, hold the lens hood around

the lens of the PPO-E04 with your other hand and turn it clockwise to screw it into the extension ring.



Resistance will increase as the PPO-E04 is screwed in. However, be sure to screw it in all the way until there

is no gap visible between the PPO-E04’s thread section and the extension ring’s port mount thread. If the

resistance is extremely high, apply some more silicone O-ring grease again to surfaces listed above.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 79 80

No comments

Olympus PPO-E04 User Manual Page 15