Olympus PPO-E04 User Manual download pdf (Page 18)

E-6



If any water is on the product, wipe it completely away and

make sure that the product is dry.



Holding the PT-E series case firmly with one hand, loosen the

PPO-E04 from the PER-E02 extension ring by turning the

PPO-E04 about 90 degrees counterclockwise. If the PPO-E04

is screwed in too tight, wrap it with a piece of rubber or other

slip-resistant material.



After loosening the PPO-E04, position it so that its lens

points down and turn it further counterclockwise until it sepa-

rates from the extension ring. Be careful not to drop the

PPO-E04, PER-E02 extension ring or PT-E series case.



Holding the PT-E series case firmly with one hand, loosen the

PER-E02 by turning it about 90 degrees counterclockwise. If the

PER-E02 is screwed in too tight, wrap it with a piece of rubber or

other slip-resistant material.



After loosening the PER-E02, point its lens down and turn it

further counterclockwise until it is separated from the PT-E

series case. Be careful not to drop the PER-E02 or PT-E.

2) When the PPO-E04 is combined with the PER-E02 Extension Ring

(When using the ZUIKO DIGITAL ED 7-14mm lens)

CAUTION:･ When the PPO-E04 and PER-E02 extension ring are removed from the PT-E series case,

water drops on the O-rings may splash on the lens or camera. If this happens, wipe the water

drops away from the lens and camera with a dry cloth.

･ Make sure that all of the parts are completely dry before dismounting.

1 ... 17 18 19 ... 80

No comments

Olympus PPO-E04 User Manual Page 18