Olympus E-520 User Manual Page 58

  • Download
  • Add to my manuals
  • Print
  • Page
    / 147
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 57
58
EN
5
Focusing and shooting functions
You can select the interval from the time the mirror is raised until the shutter is released. This
diminishes camera shake caused by vibrations when the mirror moves. This feature can be
useful in astrophotography and microscope photography or other photographic situations
where a very slow shutter speed is used, and camera vibration needs to be kept to a minimum.
1
MENU
[
X
]
[ANTI-SHOCK
z
]
2
Select the time delay after the mirror is raised and until the shutter is released from
1 to 30 seconds and press the
i
button.
3
Anti-shock is added to the shooting functions individually (single-frame shooting,
sequential shooting, self-timer shooting, and remote control shooting). For the
setting method, see “Sequential shooting” (
g
P. 5 5 ) .
You can reduce the amount of camera shake that easily occurs when shooting in low light
situations or shooting with high magnification.
OFF
Image stabilizer is off.
I.S. 1
Image stabilizer is on.
I.S. 2
This is used for panning with the camera in the horizontal direction to achieve a
blurred background. The horizontal image stabilizer is turned off, and only the vertical
image stabilizer is activated.
I.S. 3
This is used for panning with the camera in the vertical direction to achieve a blurred
background (tilting). The vertical image stabilizer is turned off, and only the horizontal
image stabilizer is activated.
Setting the focal length
By setting in advance the focal length of the lens, you can use
the image stabilizer function also with lenses other than Four
Thirds system lenses. This setting is deactivated when a Four
Thirds system lens is attached.
1
Press the
F
button in the [IMAGE STABILIZER]
screen.
2
Use the control dial or
ac
to set the focal length
and press
i
.
Anti-shock
Image stabilizer
Direct button
oj
j
o
button
Viewfinder
Displayed when
[IMAGE
STABILIZER]
is set to
[I.S. 1]
,
[I.S. 2]
or
[I.S. 3]
.
I.S. 1 I.S. 2 I.S. 3
IMAGE STABILIZER
FOCAL LENGTH
mm
OFF
50
GO
Page view 57
1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 146 147

Comments to this Manuals

No comments