Olympus SP-610UZ User Manual download pdf (Page 52)

For information on using the menus, see “Setup menu” (p. 6).

To play back camera images on a TV

Connection via AV cable

1 Use the camera to select the same video signal system as the one of connected TV ([NTSC]/[PAL]).

2 Connect the TV and camera.

Connect to the TV video

input jack (yellow) and

audio input jack (white).

Multi-connector

AV cable (supplied)

Open the connector cover

in the direction of the arrow.

Connection via HDMI cable

1 On the camera, select the digital signal format that will be connected ([480p/576p]/[720p]/[1080i]).

2 Connect the TV and camera.

When set to [1080i], 1080i format takes priority for HDMI output. However, if this setting does not match the input

setting of the TV, the signal format is changed ﬁ rst to 720p and then to 480p/576p. For details on changing the input

setting of the TV, refer to the TV’s instruction manual.

When the camera is connected to the computer by the USB cable, do not connect the HDMI cable to the camera.

Use an HDMI cable that matches the HDMI micro connector on the camera and the HDMI connector on the TV.

When the camera and TV are connected by both an AV cable and an HDMI cable, the HDMI cable will take priority.

Connect to the HDMI

connector on the TV.

HDMI micro

connector

HDMI cable (type D/sold separately: CB-HD1)

Open the connector cover

in the direction of the arrow.

●

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 83 84

No comments

Olympus SP-610UZ User Manual Page 52